Johnstone's Manhatten Grey Quick Dry Satin 750ml
Make 6 weekly payments of £3.17.
Interest free. Learn More
Johnstone's One Coat Quick Dry Satin provides a contemporary, tough and durable mid sheen finish for interior wood and metal. The water based, low odour formula is self undercoating, which makes this paint both quick and easy to use
Coverage 14m2 Per Tin
Preparation
All surfaces should be clean, dry and free from grease. Remove any loose or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Prime bare surfaces with an appropriate Johnstone’s primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
Application
Ensure maximum ventilation during application and drying. Stir well before use and apply by brush or roller. For best results load the brush or roller. Apply liberally and evenly for a smooth finish, avoid overspreading. Under normal conditions the paint is touch dry in 1-2 hours. Allow 3-4 hours before applying a second coat if required. Do not apply when air or surface temperature is below 10ºC or in damp conditions.
Cleaning: Replace lid firmly after use. Remove as much product as possible from application equipment before cleaning. Clean all equipment immediately after use in warm soapy water and rinse thoroughly.
Do not empty waste paint into drains or watercourses.
The product is not classified as hazardous according to Regulation (EC) 1272/2008 as amended.
Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) and 1,2-benzisothiazol-3 (2H)-one. May produce an allergic reaction.
Customer reviews
Weight | 1kg |