BEDEC MultiSurface Paint Dark Grey Matt 750ml

FEATURES AND BENEFITS

Use inside or out

Resists flaking and cracking

Retains gloss for longer

Chalks much less

Water-based

No special thinners required (only water)

Low VOC

Microporous & breathable

Alkali resistant

Resists heat up to 80ºC

Quick drying

Non flammable

Cleans up with water

Saves time and money

Recoatable after 4 hours

Can be used over most other old paints

No primer required*
(*unless on mild steel – use BEDEC Metal Primer, where staining can occur – use BEDEC Stain Block)

No undercoat required

Approximately 12-14 sq metres/litre per coat when applied by brush or roller depending on the texture and porosity of the substrate. Giving a wet film thickness (WFT) of approximately 77 microns per coat (Corresponding to an approximate dry film thickness (DFT) of 31 microns per coat). Spraying can considerably reduce the coverage rate depending on the type of spray equipment used. Airless spray systems for example coverage will be reduced to approximately 6-8 sq metres/litre per coat. When using a tip size of 13-15 thou @ 50-70°angle and a pump pressure of 2500 P.S.I. Giving a wet film thickness of approximately 146 microns per coat (Corresponding to an approximate dry film thickness (DFT) of 58 micros per coat).