product review overlay image

Product Description

FEATURES AND BENEFITS

  • Use inside or out
  • Resists flaking and cracking
  • Retains colour for longer
  • Chalks much less
  • Water-based
  • No special thinners required (only water)
  • Low VOC
  • Microporous & breathable
  • Alkali resistant
  • Resists heat up to 80ºC
  • Quick drying
  • Non flammable
  • Cleans up with water
  • Saves time and money
  • Recoatable after 4 hours
  • Can be used over most other old paints
  • No primer required*
    (*unless on mild steel – use BEDEC Metal Primer, where staining can occur – use BEDEC Stain Block)
  • No undercoat required
  • Approximately 12-14 sq metres/litre per coat when applied by brush or roller depending on the texture and porosity of the substrate. Giving a wet film thickness (WFT) of approximately 77 microns per coat (Corresponding to an approximate dry film thickness (DFT) of 31 microns per coat). Spraying can considerably reduce the coverage rate depending on the type of spray equipment used. Airless spray systems for example coverage will be reduced to approximately 6-8 sq metres/litre per coat. When using a tip size of 13-15 thou @ 50-70°angle and a pump pressure of 2500 P.S.I. Giving a wet film thickness of approximately 146 microns per coat (Corresponding to an approximate dry film thickness (DFT) of 58 micros per coat).

Specifications

Weight
0.95kg

Customer Reviews

BEDEC MULTI SURFACE PAINT 750ML SOFT WHITE SATIN